KitchenAid KP26M1XPM5 Mixer Manual

The KitchenAid KP26M1XPM5 is a powerful stand mixer designed for both home and professional use. With a 575-watt motor and a 6-quart stainless steel bowl, it can handle a variety of mixing tasks, from kneading dough to whipping cream. This mixer features 10 speed settings, a tilt-head design for easy access to the bowl, and a variety of attachments for versatile cooking and baking. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Attachments 7. Using the Mixer 8. Cleaning and Maintenance 9. Care & Cleaning 10. Regulatory Information 11. Troubleshooting

Features at a Glance

Key components: 575-watt motor, 6-quart stainless steel bowl, tilt-head design, 10 speed settings, and multiple attachments including a flat beater, dough hook, and wire whip.

Feature	Description
Powerful Motor	575 watts for efficient mixing and kneading
Large Capacity Bowl	6-quart stainless steel bowl for large batches
Tilt-Head Design	Easy access to the bowl and attachments
10 Speed Settings	Versatile mixing options for various recipes
Attachments	Includes flat beater, dough hook, and wire whip

Installation

Unpack the mixer and inspect for any damage. Place on a stable, flat surface away from water.

Ensure the mixer is unplugged before connecting any attachments.
Position the mixer on a clean, dry surface.
Plug into a grounded outlet.

WARNING! Ensure the mixer is stable to avoid accidents.

First-Time Setup

Before using the mixer, read the manual thoroughly. Follow these steps:

Attach the desired mixing accessory.
Plug in the mixer and turn it on.
Start with a low speed to avoid splatter.

CAUTION! Do not overload the mixer; refer to the manual for maximum capacities.

Specifications

Power: 575 watts.
Bowl Capacity: 6 quarts.
Speed Settings: 10.
Weight: Approximately 26 pounds.
Dimensions: 14 x 8.7 x 14 inches.
Color: Available in multiple colors.

Controls and Settings

The mixer features a speed control knob for adjusting mixing speeds and a tilt-head lever for easy access to the bowl.

Attachments: Easily interchangeable by lifting the tilt-head and inserting the desired attachment.

Connecting Attachments

To connect attachments:

Ensure the mixer is off and unplugged.
Lift the tilt-head and insert the attachment into the hub.
Lower the tilt-head and plug in the mixer.

Tip: Always use the correct attachment for the task at hand.

Using the Mixer

To use the mixer:

Plug in the mixer and turn it on.
Select the desired speed setting.
Add ingredients to the bowl and mix as needed.

WARNING! Do not place hands or utensils in the bowl while the mixer is running.

Cleaning and Maintenance

Unplug the mixer before cleaning. Wipe the exterior with a damp cloth and wash the bowl and attachments in warm soapy water.

CAUTION! Do not immerse the mixer base in water.

Care & Cleaning

Regularly check for any wear on the attachments and replace as necessary. Store the mixer in a dry place.

CAUTION! Avoid using abrasive cleaners that may scratch the surface.

Regulatory Information

This mixer complies with all applicable safety standards. For support, visit www.kitchenaid.com or contact customer service.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mixer not turning on	Power source issue	Check outlet and power cord.
Strange noise	Overloaded motor	Reduce load and allow to cool.
Attachments not spinning	Incorrect attachment	Ensure attachment is properly secured.
Mixing unevenly	Incorrect speed setting	Adjust speed according to recipe.

Reset: Unplug for 10 seconds to reset the mixer.

Service: For assistance, contact KitchenAid customer service.