KitchenAid KF26M2XMY5 Mixer Manual

The KitchenAid KF26M2XMY5 is a powerful stand mixer designed for both home and professional use. With a 6-quart stainless steel bowl, it can handle large batches of dough and batter with ease. This mixer features a 575-watt motor, 10-speed settings, and a tilt-head design for easy access to the bowl. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Using the Mixer 8. Cleaning and Maintenance 9. Troubleshooting

Features at a Glance

Key components: 6-quart stainless steel bowl, 10-speed settings, tilt-head design, and a variety of attachments including a flat beater, dough hook, and wire whip.

Feature	Description
6-quart stainless steel bowl	Large capacity for mixing large batches
575-watt motor	Powerful motor for heavy mixing tasks
10-speed settings	Versatile speed options for different mixing needs
Tilt-head design	Easy access to the bowl and attachments
Attachments	Includes flat beater, dough hook, and wire whip

Installation

Unpack the mixer and place it on a stable surface. Ensure the power outlet is easily accessible.

Attach the bowl: Align the bowl with the mixer and turn it clockwise to lock.
Attach the desired mixing attachment: Align and push the attachment into place until it clicks.
Plug into AC power.

WARNING! Ensure the mixer is unplugged when attaching or removing accessories.

First-Time Setup

Before using the mixer for the first time, wash all removable parts in warm, soapy water and dry thoroughly.

Plug in the mixer and ensure it is turned off before use.
Select the appropriate attachment for your mixing task.
Adjust the speed setting according to the recipe requirements.

CAUTION! Do not exceed the maximum capacity of the bowl.

Specifications

Model: KitchenAid KF26M2XMY5
Power: 575 watts
Bowl Capacity: 6 quarts
Speed Settings: 10
Weight: Approximately 26 pounds
Dimensions: 14 x 8.7 x 14 inches

Controls and Settings

The mixer features a power switch, speed control dial, and a tilt-head lever for easy access to the bowl.

Speed Control: Turn the dial to select the desired speed from 1 (stir) to 10 (whip).

Connecting Accessories

Ensure the mixer is unplugged before attaching or detaching any accessories.

Align the attachment with the drive shaft and push it into place until it clicks.
To remove, press the attachment release button and pull the attachment off.

Tip: Use the appropriate attachment for the task to achieve the best results.

Using the Mixer

To use the mixer, select the speed setting and allow it to run for the desired time as per the recipe instructions.

Start mixing at a low speed to combine ingredients.
Gradually increase the speed for thorough mixing.
Stop the mixer and scrape down the sides of the bowl as needed.

WARNING! Do not place hands or utensils in the bowl while the mixer is running.

Cleaning and Maintenance

Unplug the mixer before cleaning. Wipe the base with a damp cloth and wash removable parts in warm, soapy water.

CAUTION! Do not immerse the mixer base in water or any other liquid.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mixer does not start	Unplugged or faulty outlet	Check power connection and outlet.
Noise during operation	Improper attachment	Ensure attachment is securely connected.
Ingredients not mixing properly	Incorrect speed setting	Adjust speed according to recipe.
Bowl not locking	Misalignment	Ensure bowl is aligned and turned clockwise to lock.

Service: For further assistance, contact KitchenAid customer service.